BLYSK Heavy Textured Coating WHITE (U250) 15oz - Maazzo
BLYSK Heavy Textured Coating 15oz. - Paintable Chip Guard
BLYSK Heavy Textured Coating 15oz. - Paintable Chip Guard
BLYSK Heavy Textured Coating 15oz. - Paintable Chip Guard

Blysk

BLYSK Heavy Textured Coating 15oz. - Paintable Chip Guard

Sale price$16.79 Regular price$18.50
Save $1.71
Color:Black
Count:1
Quantity:

Textured Coating

Textured Coating is a paintable chip guard that is chip resistant, fast drying and an effective corrosion protector. 

DIRECTIONS

1. Clean surface before use to remove contaminants. Best if used on a dry, clean surface free of corrosion or dirt. Protect areas from possible over-spray that are not intended for coating.

2. Sand (400 grit sandpaper) surface and clear off residue. Clean surface again after sanding.

3. Protect and mask areas from possible over-spray that are not intended for use with products.

4. Shake vigorously before use. Apply 1 to 3 light coats with each film built about 3.0 mils per coat. Allow 60 minutes flash time between each application of each coat. Total film build should not exceed 8-10 mils.

5. Allow for 2 to 4 hours flash time of final application at 75 °F before painting. Temperature and thickness may influence dry times.

6. Using grade P500-P600 abrasive, lightly sand surface. Apply primer/sealer prior to top coating. Testing prior to top coating is recommended to ensure compatibility

7. For information on paint application, refer to paint company guidelines. BLYSK Heavy Textured Coating is compatible with most paint systems.

V.O.C CONTENTS:  Automotive bumper and trim product <1.75 MIR. Contains less than 4.43 #/gal, (531 g/l) and 62.34% V.O.C. by weight