BLYSK Flex Seam Sealer Gray SS15, Two-Part, Non-Sagging, Flexible Adhesive & Sealant

BLYSK Flex Seam Sealer is a  non-sagging, firm, extremely flexible adhesive/sealant used for sealing vertical and horizontal seams and joints on automobiles and trucks. Can be used to reinforce and eliminate flutter and vibration of body panel cross members.

DIRECTIONS 

1. Surface must be clean and free of dirt, grease, oil, rust, old seam sealer, and any other contaminants. 

2. Prime all bare metal with epoxy or urethane primer. Allow the primer to cure according to the manufacturer’s recommendations. 

3. Follow the IES dual cartridge setup instructions for loading the cartridge into the dispensing gun. 

4. Dispense the Seam Sealer into the joint or seam. Smooth out if desired with a tool or finger and feather edge. 

5. Will set up in approximately 15 minutes.

6. Scuff or sand sealer with 320 grit sandpaper prior to priming or painting. 

7. Prime and paint per manufacturer’s specifications. 

TECHNICAL INFO 

Mixed Color Gray Mix Ratio 1:1 

Work time 15-20 Minutes 

Handling Time 20-30 Minutes 

Part Paintability 45 Minutes 

Sealer Sandability 45 Minutes Full Cure Strength 6-8 Hours

STORAGE 

Should be stored in a cool, dry location at a temperature between 50°F to 86°F (10°C to 30°C).