BLYSK Fixed Flow Seam Sealer Gray SS05, Semi-Flexible, Adhesion to Bare Metal

BLYSK Fixed Flow Seam Sealer is a limited flow, firm, semi-flexible adhesive/sealant used for sealing vertical and horizontal seams and joints on automobiles and trucks. Can be used to reinforce and eliminate flutter and vibration of body panel cross members. Excellent adhesion to: bare metal, primed metal, SMC, FRP, fiberglass, aluminum, and most plastics*. Our automatic mixing system eliminates errors that are common in manual mixing.

DIRECTIONS:

1. Surface must be clean and free of dirt, grease, oil, rust, old seam sealer, and any other contaminants. 

2. Prime all bare metal with epoxy or urethane primer. Allow the primer to cure according to the manufacturer’s recommendations. 

3. Follow the BLYSK dual cartridge setup instructions for loading the cartridge into the dispensing gun. 

4. Dispense the Seam Sealer into the joint or seam. Smooth out if desired with a tool or finger and feather edge. 

5. Set up in approximately 5-10 minutes. 

6. Scuff or sand sealer with 320 grit sandpaper prior to priming or painting. 

7. Prime and paint per manufacturer’s specifications. 

TECHNICAL INFO: 

Mixed Color - Gray 

Mix Ratio - 1:1 

Work Time - 5-10 Minutes 

Handling Time - 10-20 Minutes 

Part Paintability - 20-30 Minutes 

Sealer Sandability - 20-30 Minutes 

Full Cure Strength - 6-8 Hours